[Spridgets] Turn Signal Flasher, Brake Pressure Sensor

[K. Valentine]

On Aug 19, 2008, at 9:18 PM, Frank Clarici wrote:

>
> On a 74, the brake light switch should be a 2 wire (bullet  
> pigtails) off
> the pedal box.
> Kevin found a good quality NAPA switch that almost fits and works  
> great.
> Substancially



NAPA     ECH SL 153


To use this switch you need to rethread the pedal box so the switch  
will fit.

IIRC, the threads on the switch are 10mm x 1.25pitch, but check them  
before you rethread the box.  (It is a very sturdy switch and looks  
correct for the application).

Kevin V.