[Spridgets] Rear spring hanger

Maxime Slegers max at maxengland.com
Mon Apr 28 01:14:45 MDT 2008


Hello Michael,

Have a look at this picture and the following ones, you'll see how I
rebuilt the front spring hanger:
http://www.maxengland.com/affich_photo.php?alb=MG%20Midget&ID=870

Hope this helps. More pictures showing the left side will come soon.

Max

> I took the rear end out today, and on one side, the captive bolt holding
> the front of the spring hanger was rusted/torn out.  Many of the bolts
> sheared off.  Also, the back of the floor panel is rusted out all across
> the joint between the rear wheel arch and the rear bulkhead.  I need
> pictures of these repairs.  The catalogue shows spring hanger patches and
> rear panel repair patches, but it is not clear if that is what I need.
> Any suggestions?
>
> Michael Rowe
> '74 Midget
> Long Island, NY
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as max at maxengland.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list