[Spridgets] Clutch TO brg movement

[Ron Soave]

In what was clearly a plot to slow me down, Jeff
"Chopper" Porasik talked me into a Tilton triple MC
hydraulic setup last winter. The clutch has been
giving me fits all year. I think, in the latest
iteration, I am driving the disk into the flywheel.
This is not a stock setup, neither the MC or the pedal
box itself, but the slave and clutch are stock. 
Either piece of information works for me - 

1)what should the T.O. bearing travel be when viewed
from either the top of the bellhousing, or 
2)What should the linear travel be at the clutch
fork/slave linkage?

I used to "know it when I saw it", but that was
several thousand iterations ago of MC size, pedal
travel, slave rod length....etc.

Thanks,
Ron


      ____________________________________________________________________________________
Check out the hottest 2008 models today at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html