[Spridgets] Crankshaft Spigot bearing removal

[Ron Soave]

Daniel,

I just make a mess with the grease, I've never been
able to make it work. I just use a hand drill and
carefully drill it out, it usually spins out easily
once a little material is gone.

Ron

--- Daniel1312 at aol.com wrote:
> I recall the recommended technique is to fill the
> end of the crank with 
> grease and hydraulic the spigot out by the use a
> drift or old gearbox input shaft.  


       
____________________________________________________________________________________
Pinpoint customers who are looking for what you sell. 
http://searchmarketing.yahoo.com/