[Spridgets] Back to the dead horse

[Duncan Sinclair]

It is also worth thinking about a regulator bypass. When using things like
blasters where you want max flow at full pressure I use the bypass. Even
wound right up there will still be a flow restriction through the regulator.

Thanks
Duncan

-----Original Message-----
From: David Lieb [mailto:dbl at chicagolandmgclub.com] 
Sent: Monday, October 08, 2007 5:18 PM
To: Spridgets
Subject: [Spridgets] Back to the dead horse

OK, I won't ask any more questions about pipes... But I will ask about 
filters and regulators and lubricators in a multi-drop scenario.

Obviously, I do not want a lubricator between the compressor and the pipes. 
I am looking at 3 or 4 drops along the 22' side wall of my garage. Since it 
is a big compressor, there is no built-in regulator. I am imagining a desire

for a regulator between compressor and pipe, then a small filter/regulator 
on each drop with a lubricator on a couple of the drops. Yes? No?
David Lieb 
_______________________________________________
duncan at pondhop.com

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets