[Spridgets] oil pressure relief nut

[rrengineer at dslextreme.com]

Glen,
     I have just the standard domed nut, fiber washer, spring and cup.  I
was also told by someone at APT that the standard adjustable relief
pressure kits do not fit the inline A series motor.  Usually the nut
is to large and has to be cut off and the threaded rod slotted
instead.  Just want to check out the spring and cup first, so I need
to get the nut off.  Having a problem with it's proximity to the
aluminum backplate.  Have to search my tools for a 1" thin wall
socket or go buy one.
Mike MacLean


Glen Byrns
> If you installed the adjustable oil pressure kit with the looong threaded
> bolt and locknut, you will find it needs to be backed all the way out
> till you don't feel any spring pressure and then advanced a few turns
> against the spring.  Test and adjust, repeat.
>
> Glen Byrns
> _______________________________________________
> rrengineer at dslextreme.com
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets