[Spridgets] Air Compressor Fittings

[Bud Osbourne]

David,
Try your friendly, local hydraulic systems supply house (google search
hydraulic hoses).  They can make up a jacketed hose for you, which will
last just about forever and prevent the vibrations from the compressor
from being transmitted to the copper tubing joints.
Bud Osbourne

-----Original Message-----
From: spridgets-bounces+abcoz=hky.com at autox.team.net
[mailto:spridgets-bounces+abcoz=hky.com at autox.team.net] On Behalf Of
David Lieb
Sent: Thursday, October 04, 2007 7:55 PM
To: Spridgets
Subject: [Spridgets] Air Compressor Fittings

I have finally gotten the wiring done for my air compressor. Now it is
time 
to do some plumbing for it. Grassroots Motorsports recommends using 3/4"

schedule L or K copper tubing for the main run with 1/2" drops. Fine
with 
me. Questions arise as to appropriate hose to connect from the
compressor to 
the tubing, whose filter and regulator to use, etc. Speak to me!
David Lieb 
_______________________________________________
abcoz at hky.com

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets