[Spridgets] Diffs again, if I may

[oldsaabguy]

The rules of many racing groups do not allow a welded or limited slip  
diff.  They do not, however, have any limitations on the size of the  
shims / washers / spacers that you can cram in between the gear  
mounting.  Won't last forever but will get you through most of a pro- 
rally..

Lester

.. well, you did mention racing..


On Jun 27, 2007, at 4:03 PM, Brad Fornal wrote:

> I understand that the best way to accomplish a welded diff, is to pour
> melted lead on the gears to lock them. Then, you can apply heat to
> remove the lead at a later date, should you so require.
>
> Brad
>
> On 6/27/07, derf <derf247 at gmail.com> wrote:
>> Welded diffs, OK for racing but not best for street use, no?
>> _______________________________________________
>> tequila.brad at gmail.com