[Spridgets] 20-minute engine swap
Deikis, John G
John.Deikis at va.gov
Fri Jun 15 10:45:00 MDT 2007
I believe this idea requires one to remove both front fenders first in
order to get at the heads of the screws (Posidrive, preferred). In that
case, I corded electric drill with a screw bit should work well. And a
generator at the track to provide power for the drill. And, while it's
running, might as well power a little fridge to hold cool beers for
after the motor comes out.
-----Original Message-----
From: derf [mailto:derf247 at gmail.com]
Sent: Wednesday, June 13, 2007 9:41 AM
To: spridgets at autox.team.net
Subject: Re: [Spridgets] 20-minute engine swap
Yeah, and what if they're underprivileged and only have corded screw
guns? Can they use manual tools?
See, I'm not the only one around here with a (bad) sense of humor.
On 6/13/07, Daniel1312 at aol.com <Daniel1312 at aol.com> wrote:
> Pozidrive or Phillips pan head? Enquiring minds want to know!
>
> In a message dated 13/06/07 03:06:20 GMT Daylight Time,
soavero at yahoo.com
> writes:
>
>
> > Replace the bolts with pan head screws and use your
> > cordless screw gun.
More information about the Spridgets
mailing list