[Spridgets] Tranns bolts

[Jack Laird]

Yep, and that may be one of the things I must do when I pull the engine as 
the weather gets cooler.


----- Original Message ----- 
From: "Robert Duquette" <robertduquette at sympatico.ca>
To: <spridgets at autox.team.net>
Sent: Tuesday, July 17, 2007 7:43 AM
Subject: Re: [Spridgets] Tranns bolts


> Well, you could always remove the engine and trans and test fit them that 
> way. ;)
>
> Nobody near you has one out?  You can always drop me a visit and try them 
> in one of mine?
>
> Robert D.
> Ottawa Canada
>
>> From: "Jack Laird" <jlaird237 at cox.net>
>>
>> All concerned agree that bolts are 3/8th by 3 1/4 24 pitch thread. I have
>> two of those but have been unable to get even one in so far. Have 
>> loosened
>> the other two on the tunnel and aligned the mount with a large phillips
>> screwdriver, seem to be centered. Tapered one of the bolts and threads 
>> seem
>> clear.
>>
>> No clue, will keep messing.
>>
>> Thanks all for the feed back.
>>
>> Jack
> _______________________________________________
> jlaird237 at cox.net
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.6/902 - Release Date: 7/15/2007 
> 2:21 PM