[Spridgets] Dwell vs gap..

[Bud Osbourne]

Dwell angle should be set at 60 degrees +/-2.  The beauty of setting
your dwell angle precisely at 60 is that, if you then set the timing
just right; each time you reset the dwell to 60 degrees, the timing will
also be spot-on.  If you set point gap with a feeler gauge; you will,
invariably be a couple of degrees off 60, and your timing will not be
just right.
If you set points on a very regular basis with a feeler gauge, you will
become consistent enough to get is close each time.  If, however, you
are like the rest of us and check dwell angle/point gap only once a
month or so; you will be much more consistent with a dwell meter.
Bud Osbourne  

-----Original Message-----
From: spridgets-bounces+abcoz=hky.com at autox.team.net
[mailto:spridgets-bounces+abcoz=hky.com at autox.team.net] On Behalf Of
oldsaabguy
Sent: Saturday, July 14, 2007 5:58 PM
To: Spridgets List
Subject: [Spridgets] Dwell vs gap..

Hello all, does anyone have the dwell numbers for a Bugeye?  All that  
I can find are the point gap numbers.

Thanks,

Lester