[Spridgets] Engine timing - Mini123 dizzy

[derf]

I agree with that.

On 7/8/07, Bill L <pythias at pacifier.com> wrote:
> Hello Joe,
>
>        rather than pulling the dizzy and rotating the shaft, maybe
>        swap #1 and #4 plug wires, and #2 and #3 wires? .. .. get the
>        engine running THEN take care of nice-itys?
>

I'm not familiar with the 123 dizzies.  I imagine the LED comes on for
some reason that should be explained in the manual.

When you pulled the dizzy, did you pull the dizzy drive shaft, too?
If not, you will have problems.