[Spridgets] fuel line clips...

[Duncan Sinclair]

I used a combination of 1/4" rubber lined P-clips from the hardware store
with sheet metal screws below the box section areas. The seat strengthening
rails have holes in the sides and I used tie wraps for that area. 

Duncan

-----Original Message-----
From: dmg at bossig.com [mailto:dmg at bossig.com] 
Sent: Wednesday, July 04, 2007 6:23 PM
To: spridgets at autox.team.net
Subject: [Spridgets] fuel line clips...

I need the clips that keep the fuel line held to the body from the back up
to 
the engine compartment.
My fuel line is not secured anywhere and is hanging down. Bad News! 
They do not appear to be in the Moss catalogue. 
VB shows a clip that appears to need a hole in the underbody.

Before I order some of these, is there a clip from someone like NAPA that 
would do the job?? Or has someone found a better way to do this??
I'm not interested in originality but in safety... 

TIA
Dave G.
_______________________________________________
duncan at pondhop.com

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets