[Spridgets] New Engine

[Daniel1312 at aol.com]

Hi Howard,

The cam is APTs equivalent to Kent's 286 scatter so I'm expecting the new 
engine will make similar power (it's a road car).

The titan 1.5 roller rockers from the existing engine are going in the new 
engine unless I have enough money for something else better (seems unlikely).

The pistons are Omega with a 6.4cc dish but no the really expensive Omega's.

Valve sizes haven't been decided yet but the head will be a Pierce for the 
weight saving alone.

Igniton will be the existing Inductor/reluctor Microdynamics electronic unit 
and power coil.

Given on the Uk petrol octane I can run 10.5:1 on an iron head I'm expecting 
to run 11:1 on the Pierce aluminium head.

Regards


Daniel

In a message dated 31/08/07 01:12:44 GMT Daylight Time, Miniac7 writes:

> Let me be the first to call you that.
>   
> I'd like to know which cam, rockers, pistons, intake, exhaust and ignition 
> you are using? Do you know the CR?
>   
> Howard Collins