[Spridgets] valve guides

Hal Faulkner hal at katemuir.com
Sun Aug 26 20:52:39 MDT 2007


This never showed up on the list, so here it is again.

Hal

Oh yes,
"drill size 21/64".
Pipe threads are bizzare.
Hal

-----Original Message-----
From: spridgets-bounces+hal=katemuir.com at autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com at autox.team.net]On Behalf Of
Hal Faulkner
Sent: Saturday, August 25, 2007 11:08 AM
To: WJHS1960; Spridgets
Subject: Re: [Spridgets] valve guides


Missed the post that this is a response to, but....
The tap that I used to chase the threads on the air holes on my 12G1316 head
is clearly marked 1/8-27 NPT.  Much bigger in diameter than 1/8".

Hal

-----Original Message-----
From: spridgets-bounces+hal=katemuir.com at autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com at autox.team.net]On Behalf Of
WJHS1960
Sent: Friday, August 24, 2007 3:04 PM
To: Spridgets
Subject: Re: [Spridgets] valve guides


<<not 1/8-27 pipe thread...>>

Yep.  1/8 would just fall inside<G>!!


More information about the Spridgets mailing list