[Spridgets] grease nipples

[BCAH at aol.com]

For the steering rack all I did was remove the nipple and drill out the  
little ball with a small drill bit.The spring follows. Then I pushed a small  
rubber hose over the spout of a pump style oil can,---pushed the other end over  
the reinstalled nipple , ---and pumped away. To protect  the rack from  
dirt(because of the open hole) I purchased some caps at the hardware store.  These 
caps ,I think , are used to push over exposed bolts so one does not get  cut. 
Works for me,-------Bob C in KS



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour