[Spridgets] [midgetsprite] Don't let her go!

Robert Bruce Evans b-evans at earthlink.net
Mon Aug 20 14:57:37 MDT 2007


Brad Formal wrote:  "Thank you Ginny!"

I hope others agree Virginia should not be let off the hook and off our list just because she has to sell her car!  Good people are hard to find these days!

Buster
Practical Classics Salutes 23 Spridget Miracle Workers in October


----- Original Message ----- 
From: Brad Fornal 
To: midgetsprite at yahoogroups.com
Sent: 8/20/2007 1:34:55 PM 
Subject: Re: [midgetsprite] Anyone care to check their spare parts bins?
Brad Formal wrote: Thank you Ginny!!

On 8/20/07, Virginia Leonard <breckrider at comcast.net> wrote:
> I'm pretty sure I have a fan blade in a box in the garage. It's yellow but
> don't remember the shape it's in. I'll look when I get home.

> -----Original Message-----
> From: midgetsprite at yahoogroups.com [mailto:midgetsprite at yahoogroups.com] On
> Behalf Of Brad Fornal
> Sent: Monday, August 20, 2007 11:55 AM
> To: Spridgets; Yahoo Spridget list
> Subject: [midgetsprite] Anyone care to check their spare parts bins?
> I am looking for a few parts I am missing for the 68 engine
> re-assembly project. I know there are vendors on the list, and I will
> hit them up next, but I thought I would ask if anyone cares to look in
> their spares bins.
> Parts needed...
> The 6 blade plastic fan, I'd like one that looks nice enough to go
> onto a repainted, purtied up engine. (I'm fairly certain this will
> have to be purchased new)
> The clips that hold the throwout bushing onto the pivot arm.
> A couple of exhaust manifold studs. Or, if someone knows the size,
> I'll run down to the local NAPA.
> I'm sure I'll find more, but this is what I am needing so far. I have
> these bit on other completed assemblies, but I would rather buy the
> few parts I need, than scavange something else.
>
> Thank you,
> Brad>


More information about the Spridgets mailing list