[Spridgets] fuel pump

[Mike/Donna Carpenter]

I think that this question came up a few months ago.  It was the early to mid '70s 1275, usually the 12V ones that have the fuel pump hole.  They are usually blocked off.

Mike C

-----Original Message-----
>From: BCAH at aol.com
>Sent: Aug 3, 2007 5:43 AM
>To: spridgets at autox.team.net
>Subject: [Spridgets] fuel pump
>
>Hello, I have two 1275cc on the floor.  One has a hole with a blanking  plate 
>for the use of a mechanical fuel pump and the other does not. What car had  a 
>1275 and a mechanical pump? When the 1275 goes into the BI, I was planning on 
> using the mech pump from the 948cc. Burlen carb e-mailed me that there are  
>different part numbers for the different pumps. I was thinking they were 
>really  the same unit with the number simply reflecting the application.This 
>weekend  I'll drag out everything and measure but I was hoping someone had some 
>knowledge  about this.Any thoughts?----------------Bob C in KS
>
>
>
>************************************** Get a sneak peek of the all-new AOL at 


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com