[Spits] Electronic Ignition

[Bill Gingerich]

On a 73 I believe it is a wire in the wiring harness.  There is no separate
resistor.  My 74 is that way as well.  When I did  my Pertronix I just ran
the 2 wires to the 2 terminals on the coil.  It's been running fine for
about 12 years.

BillG #133


-----Original Message-----
From: Spitfires [mailto:spitfires-bounces at autox.team.net] On Behalf Of Doug
Mitchell
Sent: Friday, September 19, 2014 11:12 AM
To: Spitfires
Subject: Re: [Spits] Electronic Ignition

Last week, I inquired about which electronic ignition to use. I purchased a
Pertronix, and started to install it yesterday. This is on a 73, US spec
1500. Can someone please tell me the physical location of the ballast
resistor?

Thanks,
Doug
dmitchel at sbcglobal.net
_______________________________________________

Spitfires at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spitfires/wrgingerich@gmail.com