[Spits] Pop Rivets

[Doug Braun]

Unfortunately I had to drill out and destroy all of the ones on my car.  I
should have taken some close-up photos first...

I have some interesting rivets I bought once, at a hardware store
going-out-of-business sale.  The bottom end
is sealed, so there is no path for moisture to pass through the center
hole.  I might use those.

Doug

On Sun, Oct 28, 2012 at 9:54 PM, Andrew S. Mace <zoboherald at aol.com> wrote:

>  I think the only significant difference is that original rivets tended
> to be steel, while those more commonly available from hardware stores
> tend to be aluminum. At least that's what I remember, not having done this
> in quite some time.
>
>  --Andy Mace