[Spits] Bushings

[spitlist at cox.net]

You may have t resort to using a torch to burn the rubber away and knock the outer steel sleeve out using a cold chisel.

Joe

---- Roger Elliott <elliottr at rmi.net> wrote: 
> Hi,
> 
> I am still working on my differential and leaf spring.  I am trying to 
> replace the mounting bushings on both, but cannot get them out.
> 
> They are the ones with a external metal sleeve, rubber then an internal 
> metal sleeve.  Both the differential and spring are out of the car.
> 
> On the spring I have tried using a bolt - socket that that bushing will 
> fit into - bushing - socket about the same size as the bushing  then a 
> nut and tightening it.  I didn't get anywhere.  I don't have a socket 
> large enough for the differential bushing to slide into.
> 
> Any suggestions on how to get them out?
> 
> Thanks,
> Roger
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as spitlist at cox.net
> 
> Spitfires at autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
> 
> http://www.team.net/archive