[Spits] Mount body

[Daniel Parrott]

Look at page 38 from the latest Victoria British catalog.  I appears that
there should be 6 pads, two at the rear over the rear axles, and another set
a at the heel board mounts, and a last pair where the seat belts are
attached.


Dan Parrott
Savannah, Ga
1980 Triumph Spitfire "PJ"
1972/1978 Spit Six Project car "Joseph"



-----Original Message-----
From: spitfires-bounces at autox.team.net
[mailto:spitfires-bounces at autox.team.net] On Behalf Of Larry Vaughan
Sent: Wednesday, September 30, 2009 10:32 PM
To: spitfires at autox.team.net
Subject: [Spits] Mount body

I am about ready to set my '73 Spitfire body back on the refurbished 
frame. When I seperated the two, I was confidant I would remember where 
the two 1/4 inch thick aluminum spacers went. I don't remember. They 
went on the front outboard body bolts, at the firewall, or the ones 
directly above the rear axle. Can anyone refresh my memory? The body 
mounting kit I bought didn't have the spacers.

Larry
Spitfires at autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive