[Spits] Hard top head lining

[FRED E THOMAS]

List, the headliner material is also made with the foam backing already 
attached, ask your local upholstery shop for a sample.  "FT"
======================================================================================================
----- Original Message ----- 
From: "Doug Braun" <doug at dougbraun.com>
To: <sagreenwood at earthlink.net>; <spitfires at autox.team.net>
Sent: Monday, May 19, 2008 6:50 PM
Subject: Re: [Spits] Hard top head lining


>I have redone my hardtop's headliner, but I was
> fortunate to have all the bows.  It takes a while to
> do a good job on this.  (For example, you really have
> to remove the rear window.)
>
> A layer of foam might work, but you would definitely
> have to experiment to make sure there would be no
> lousy-looking areas.
>
> Doug
>
>
> --- Stuart Greenwood <sagreenwood at earthlink.net>
> wrote:
>
>> Has anyone used foam rubber or some other material
>> to stick to the roof of the hardtop instead of using
>> the factory rooof liner  which is suspended off the
>> roof by spring bows. I haven't got any spring bows
>> and I haven't seen any for sale. As I live in South
>> California there is no chance of any significant
>> condensation on the inside of the roof so I think
>> that something stuck to the roof will work fine.
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Spitfires at autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
>
> http://www.team.net/archive