[Spits] Rusty Panel treatment

[Joe Curry]

Barry,
I would have the thing media blasted to remove all the rust.  There is a lot
more metal in those old vehicles than you find in new cars.  After all the
rust is blasted away, treat it with a good epoxy primer to seal it against
the elements because it will quickly attract rust from the coastal climate
down there.

Joe

-----Original Message-----
From: spitfires-bounces+spitlist=cox.net at autox.team.net
[mailto:spitfires-bounces+spitlist=cox.net at autox.team.net] On Behalf Of
Barry Schwartz
Sent: Tuesday, August 26, 2008 4:03 PM
To: spitfires at autox.team.net
Cc: triumphs at autox.team.net
Subject: [Spits] Rusty Panel treatment

Well It happened, not on my Triumph, but my 40 ford TR parts hauler.  Some
inattentive woman swerved right in front of my truck trying to enter a
driveway and dragged her explorer over the front of my fender damaging it
pretty badly.  I may be that it can be pounded out, but I have a line on a
fender that looks to be in pretty good physical shape, but has a coating of
med surface rust -  I would like to use my original fender, since it was
rust free, but if I have to get this fender I thought I would see what
worked for others
What kind of treatment would work best for coating the part after sanding
down as much of the rust as I can?  Eastwoods rust encapsulator, I have
some of that?  Remember, this isn't a frame or hidden part, but an exterior
body panel - so it would be primed and painted -

Thanks -
Barry Schwartz
La Mesa, CA (San Diego)
Spitfires at autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive