[Spits] Spitfire hardtop tie bar mountings needed

[Stasyszen, Jerry]

I bought some from Vicky Brit


Thanks
Jerry Stasyszen

-----Original Message-----
From: spitfires-bounces at autox.team.net
[mailto:spitfires-bounces at autox.team.net] On Behalf Of Doug Braun
Sent: Tuesday, September 18, 2007 7:37 PM
To: Harve Thorn; nass at yahoogroups.com; NASS-club at yahoogroups.com;
spitfires at autox.team.net; spitfire-enthusiast at yahoogroups.com
Subject: Re: [Spits] Spitfire hardtop tie bar mountings needed

Good luck.  Those parts are ultra-rare.  I have never seen any.

For that application, I use the short bars along with 3-1/2" long bolts
that will let the bars reach the mounting holes on the body.  It does
look a bit improvised, but the hardtop is much more secure and less
squeaky with them installed.

Doug Braun
'72 Spit

--- Harve Thorn <maya2blue at juno.com> wrote:

> I am looking for the tie bar mountings used to mount a factory hardtop

> when the soft-top is not fitted.
>
> Part numbers are 624874(RH) and 624873(LH)  (long tie bars vs. the
> short ones used when the soft-top is fitted)
>
> See them at
> http://www.rimmerbros.co.uk/spitfire/images/199a.gif
>
> Many tks any help!
>
> Harve Thorn
> NASS #79
> _______________________________________________
> Spitfires mailing list
> Spitfires at autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
_______________________________________________
Spitfires mailing list
Spitfires at autox.team.net
http://autox.team.net/mailman/listinfo/spitfires