Found the problem. Two years ago I had the HS4s rebuilt, including teflon
bushings on the throttle valve. While looking over the car Friday I found
one of the teflon bushing has completely out place, one big air leak.
Looks like I need to get the throttle bushing rebuilt again, but this time
in brass, not teflon.
spitfires-request at aut
ox.team.net To: spitfires at autox.team.net
Sent by: cc:
spitfires-bounces at aut Subject: Spitfires Digest, Vol 1, Issue 48
ox.team.net
09/03/2007 02:00 PM
Please respond to
spitfires
--- "Clark W. Nicholls" <clarkfot at cwnicholls.net>
wrote:
> Are you sure there's no spark only on that cylinder?
> Check the points gap too.
> Try it on different dist cam lobes, see if it
> changes.
> If the distributor is worn and the shaft wobbles it
> could be worse on that
> one cylinder perhaps.
> I solved my worn distributor by installing the
> crane/Allison solid state
> system.
> Let us know!