<div dir="ltr"><div class="gmail_default" style="font-family:monospace">Saturday I ran a small-lot autocross at a dragstrip near Rock Falls Wisconsin.  My Caterham was pushing a bit and I had trouble staying in the power band in second gear.<br><br>Also, there is a light clicky sound when I drive over bumps on the street.<br><br>The click is probably the rear sway-bar moving sideways and hitting the hose clamps that locate it in its aluminum-block brackets.  First shot at quieting it is to put in a couple of cable ties between the clamps and the blocks.  If that does not do it I will slit some PEX.<br><br>Next, adjust the rear bar stiffer.  Problem:  I have removed all the fasteners and the blocks will not move.  The Heim joints pulled out OK.  I swung the bar down.  It moves very easily.  I shot the blocks with Kroil, smacked them with a wrench and stopped for lunch. At least if I need to use heat, the part is far from anything to damage.</div><div class="gmail_default" style="font-family:monospace"><br></div><div class="gmail_default" style="font-family:monospace"><a href="https://www.flickr.com/photos/pethier/54000198064">https://www.flickr.com/photos/pethier/54000198064</a><br></div></div>