<div dir="ltr"><div class="gmail_default" style="font-size:large">If you have fairly unobstructed access to the underside, you can use a Skill saw or router to cut some grooves 1/2 to 3/4 of the thickness of the table's top (especially in areas of the most warpage) and then add some cleats across the underside to pull the warpage of it. </div><div class="gmail_default" style="font-size:large"><br></div><div class="gmail_default" style="font-size:large">I wouldn't do this to a valuable antique but it is more likely to be successful than trying to rehydrate/dehydrate warped wood. </div><div class="gmail_default" style="font-size:large"><br></div><div class="gmail_default" style="font-size:large">EjR </div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jul 25, 2023 at 7:56 PM Jim Franklin <<a href="mailto:jamesf@groupwbench.org">jamesf@groupwbench.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I foolishly picked up a "free" 1930s dining table. It has a stunning veneered top and nice fluted double legs with intricate designs on the skirt.<br>
<br>
It was free because the PO stored it in his basement and the top warped pretty good, the sides cupping upwards as moisture entered the underside.<br>
<br>
I stripped the shellac off the top and laid it face down on the lawn to try and introduce moisture to the top while the sun baked the underside under weight, but it didn't move. I was able to remove the loosened underside veneer (maybe I should have done this before I put it in the sun?) but a few hours of hot steam and clamps wasn't enough to budge things. I don't want to remove the top veneer since I'd prefer a warped top to destroyed veneer. <br>
<br>
It seems I have 2 choices - soak the underside long enough for the entire 1/2" thick solid wood top to get wet and then clamp and dry it, and risk loosening the veneer, or build an environment where the humidity is very low and let the underside dry out well below ambient humidity, pulling the top straight. I'm in MA and it's a very damp summer.<br>
<br>
Any thoughts on which is better, and if the latter, how to create this artifical desert?<br>
<br>
thanks,<br>
jim<br>
_______________________________________________<br>
<br>
<a href="mailto:Shop-talk@autox.team.net" target="_blank">Shop-talk@autox.team.net</a><br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.96<br>
Archive: <a href="http://www.team.net/pipermail/shop-talk" rel="noreferrer" target="_blank">http://www.team.net/pipermail/shop-talk</a> <a href="http://autox.team.net/archive" rel="noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/ejrussell61@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/shop-talk/ejrussell61@gmail.com</a><br>
<br>
</blockquote></div>