<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">I asked a good friend in the window tinting business about this. He polled his techs and passed on this advice:<div><br></div><div><p class="p1" style="margin: 0px; font-stretch: normal; line-height: normal; font-size-adjust: none; font-kerning: auto; font-variant-alternates: normal; font-variant-ligatures: normal; font-variant-numeric: normal; font-variant-east-asian: normal; font-variant-position: normal; font-feature-settings: normal; font-optical-sizing: auto; font-variation-settings: normal; -webkit-text-size-adjust: auto;"><span class="s1">Bill, my tint techs agreed on this:</span></p><p class="p1" style="margin: 0px; font-stretch: normal; line-height: normal; font-size-adjust: none; font-kerning: auto; font-variant-alternates: normal; font-variant-ligatures: normal; font-variant-numeric: normal; font-variant-east-asian: normal; font-variant-position: normal; font-feature-settings: normal; font-optical-sizing: auto; font-variation-settings: normal; -webkit-text-size-adjust: auto;"><span class="s1">We wouldn’t recommend the heat gun on the interior because he can burn the plastics inside easily.</span></p><p class="p1" style="margin: 0px; font-stretch: normal; line-height: normal; font-size-adjust: none; font-kerning: auto; font-variant-alternates: normal; font-variant-ligatures: normal; font-variant-numeric: normal; font-variant-east-asian: normal; font-variant-position: normal; font-feature-settings: normal; font-optical-sizing: auto; font-variation-settings: normal; -webkit-text-size-adjust: auto;"><span class="s1">His best bet is to use soapy water (let it sit for 5 minutes) and then scrape it with a razor blade. But he has to be careful otherwise he’ll scratch the glass. If the glue is really stuck on and not coming off easily, I would recommend using an all-purpose degreaser. Make sure he wipes the door panel off after he applies the degreaser if he goes that route. </span></p><p class="p1" style="margin: 0px; font-stretch: normal; line-height: normal; font-size-adjust: none; font-kerning: auto; font-variant-alternates: normal; font-variant-ligatures: normal; font-variant-numeric: normal; font-variant-east-asian: normal; font-variant-position: normal; font-feature-settings: normal; font-optical-sizing: auto; font-variation-settings: normal; -webkit-text-size-adjust: auto;"><span class="s1">If he’s looking to re-tint it afterwards, it’s best to come in so we can do the removal.</span></p><div><br></div><div><div class="gmail_default" style="-webkit-text-size-adjust: auto; font-size: small;"></div><div dir="ltr"><div><p class="p1"><span class="s1">Once you give a charlatan power over you, you almost never get it back. - Carl Sagan</span></p></div></div><div dir="ltr"><br><blockquote type="cite">On Apr 8, 2023, at 6:15 PM, Ronnie Day <ronnie.day@gmail.com> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div dir="ltr">I recently had the same situation on both our '98 F-150 and an '02 Suburban. Fortunately just the front windows on both had the aftermarket tint. We ended up buying a steamer (<a href="https://www.amazon.com/dp/B07C44DM6D?psc=1&ref=ppx_pop_dt_b_asin_title">https://www.amazon.com/dp/B07C44DM6D?psc=1&ref=ppx_pop_dt_b_asin_title</a>) because we knew we had additional uses, plus we had an Amazon credit that covered the cost. I was going to take the trucks to a local but then we got the steamer. The steamer cost about what a shop quoted me just to remove the old tint on one of the trucks. I decided to use only distilled water in it to minimize mineral deposits in the tank. It was a bit messy, but it worked well.<div><br></div><div>I'd been dealing with the film on the F-150 going bad for some time. A heat gun didn't do well at all, even with a spray bottle. The heat was too difficult to control, while the combination of the gentle heat and the steam from the steamer allowed me to pull the old film off in sheets instead of melted pieces. I did need to use lacquer thinner to clean up some spots where the adhesive stuck to the glass. I used the blue heavy duty paper towels to clean up the residual adhesive.</div><div><br></div><div>FWIW,<br></div><div>RD</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Apr 8, 2023 at 5:47 PM David Scheidt <<a href="mailto:dmscheidt@gmail.com">dmscheidt@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto"><div dir="ltr"></div><div dir="ltr"><br></div><div dir="ltr"><br><blockquote type="cite">On Apr 8, 2023, at 04:10, Tim . <<a href="mailto:tims_datsun_stuff@outlook.com" target="_blank">tims_datsun_stuff@outlook.com</a>> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr">
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0);background-color:rgb(255,255,255)">
The tint on the DS of my daily started to fail last fall. During this ongoing failure there was adhesive getting on the inner squeegie as well as the tint that wasn't peeling. Today I finally had to pull it all off as it was starting to bunch up and peel considerably
worse. </div>
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0);background-color:rgb(255,255,255)">
<br>
</div>
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0);background-color:rgb(255,255,255)">
Now I have all the adhesive to try to remove. </div>
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0);background-color:rgb(255,255,255)">
<br>
</div>
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0);background-color:rgb(255,255,255)">
Steam and scraping was suggested by the tint place but I don't have access to a steamer. Do you all think a cautiously used heat gun with a stainless scraper would work as well? </div></div></blockquote><div><br></div>Plastic scraper. A small steam cleaner is pretty cheap. You can also rent them <div><br></div><div>Or just punt and take the care to a detail shop. <br></div><div><br></div><div><br></div><div><br></div></div>_______________________________________________<br>
<br>
<a href="mailto:Shop-talk@autox.team.net" target="_blank">Shop-talk@autox.team.net</a><br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.96<br>
Archive: <a href="http://www.team.net/pipermail/shop-talk" rel="noreferrer" target="_blank">http://www.team.net/pipermail/shop-talk</a> <a href="http://autox.team.net/archive" rel="noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/ronnie.day@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/shop-talk/ronnie.day@gmail.com</a><br>
<br>
</blockquote></div>
<span>_______________________________________________</span><br><span></span><br><span>Shop-talk@autox.team.net</span><br><span>Donate: http://www.team.net/donate.html</span><br><span>Suggested annual donation $12.96</span><br><span>Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive</span><br><span></span><br><span>Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/brabel@comcast.net</span><br><span></span><br></div></blockquote></div></div></body></html>