<div dir="auto">The finger trick is what works for me, along with having plenty of media available.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 10, 2022, 15:57 Pat Horne <<a href="mailto:patintexas@icloud.com">patintexas@icloud.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I have a similar problem with an Eastwoods table top cabinet. I'm using <br>
coal slag from Tractor Supply. I find that the slope of the cabinet <br>
bottom is not steep enough to recycle the slag well. When I see that <br>
there is less media than I expect, I put my finger over the nozzle & <br>
blip the trigger, causing any media in the hose & around the pickup to <br>
blow backwards, then settle down. I am then able to blast for a few more <br>
minutes, until it happens again. I also use a 60 gallon single stage <br>
compressor. Here in central Texas it is quite humid most of the time so <br>
I use a small in line water separator at the inlet to the cabinet. I <br>
should buy a larger one but haven't gotten around to it. If I am doing a <br>
lot of blasting I need to empty it about every 15 minutes, even though I <br>
empty the water out of the tank & drip legs at each startup.<br>
<br>
Peace,<br>
<br>
Pat<br>
<br>
<br>
On 2/10/2022 2:33 PM, Tim . wrote:<br>
> Hey all,<br>
><br>
> I have a stand-up HF blast cabinet pushed by a single stage Porter <br>
> Cable 80-gallon compressor. The compressor runs almost constantly but <br>
> keeps up just fine. My air is not the driest but I rarely see moisture <br>
> being blasted on to the metal unless it is summer and more humid.<br>
><br>
> I am currently using "black blast" from Menards on a 50+ year old <br>
> drive shaft. It is rusty but is coming clean relatively easy....kinda....<br>
><br>
> My issue is I get about 20-45 second of real good and quick <br>
> cleaning/blasting then the stream coming out of the nozzle seems to <br>
> get weaker and not have much if any media in it. If I clean the <br>
> intake, it works fine again for a little bit, then get less effective <br>
> again.<br>
><br>
> Clearing the intake is easy enough but slows down the process. (this <br>
> is quite the PITA when the temps are in the 20s or lower.)<br>
><br>
> Thought on why I have to keep clearing the intake?<br>
><br>
> Thanks<br>
> tim<br>
><br>
><br>
><br>
> _______________________________________________<br>
><br>
> <a href="mailto:Shop-talk@autox.team.net" target="_blank" rel="noreferrer">Shop-talk@autox.team.net</a><br>
> Donate: <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
> Suggested annual donation  $12.96<br>
> Archive: <a href="http://www.team.net/pipermail/shop-talk" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/shop-talk</a> <a href="http://autox.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive</a><br>
><br>
> Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com</a><br>
><br>
-- <br>
We support Habitat for Humanity, a hand UP, not a hand OUT<br>
<br>
_______________________________________________<br>
<br>
<a href="mailto:Shop-talk@autox.team.net" target="_blank" rel="noreferrer">Shop-talk@autox.team.net</a><br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.96<br>
Archive: <a href="http://www.team.net/pipermail/shop-talk" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/shop-talk</a> <a href="http://autox.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com</a><br>
<br>
</blockquote></div>