<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
I second the fuel shutoff. I have one on my wood chipper that may
go 8-10 months without being used. I run Stabil in my gas, but I'm
California and they really mess gas up here. <br>
<br>
I had a lawnmower valve stick after about two months a while ago.
After getting it unstuck, when the mower was seldom used in the
California winter, I'd slowly pull the cord every few weeks to make
sure nothing stuck again. <br>
<br>
I have a commercial grade string trimmer for brush clearance and was
told by the local shop to try and make sure I start it every couple
months to keep the carb clean. I only use TruFuel in the trimmer
and it makes a big difference over my past trimmers. They make a
4-cycle version. It may be worth it to drain the regular gas and
put some of this in, run the blower a few minutes, then shutoff the
gas and let the engine run out of fuel. It is stable for the long
term and doesn't gum things up like regular gas.<br>
<br>
Sample:
<a class="moz-txt-link-freetext" href="https://www.homedepot.com/p/TruFuel-4-Cycle-Ethanol-Free-Fuel-6527238/203571144">https://www.homedepot.com/p/TruFuel-4-Cycle-Ethanol-Free-Fuel-6527238/203571144</a>
<br>
<br>
Brian<br>
<br>
<div class="moz-cite-prefix">On 4/13/2021 11:03 AM, Scott Hall
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAK73_u7D4V+W1ufNk_RGEktx0A63ngN_A30wtCT+EYf_0f8N+A@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">Guys,
<div><br>
</div>
<div>I have a snowblower. It might not get used at all in a
winter, it might get used ten times. And I have a long
driveway, so I don't want to sell it.</div>
<div><br>
</div>
<div>I would like to winterize it such that next October if I
want to fire it up I don't have to do what I did this February
and disassemble it in the cold to get it to run.</div>
<div><br>
</div>
<div>It doesn't have a battery, so this is a gas/carb. issue
only.</div>
<div><br>
</div>
<div>Is it best to drain most of the gas and let it run until it
dies from starvation? Would that leave residue on the jets
that might varnish? I'm hesitant to use Sta-bil--I had a bad
experience with that once. Drain the gas, take it apart and
spray everything with carb cleaner or the like?</div>
<div><br>
</div>
<div>This is the first engine I have that might sit for two
years straight then need to get fired up as quickly as
possible, so I'd like to do this right.</div>
<div><br>
</div>
<div>Thanks in advance.</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated" href="mailto:Shop-talk@autox.team.net">Shop-talk@autox.team.net</a>
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation $12.96
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/shop-talk">http://www.team.net/pipermail/shop-talk</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net">http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net</a>
</pre>
</blockquote>
<br>
</body>
</html>