<div dir="ltr"><div>Eventual solution: a combination of several things.</div><div><br></div><div>1) use Demel to cut a deeper flat into the screw head, unscrew like a normal screw.</div><div>2) press down REALLY HARD with flat-blade screwdriver into security screw head, eke out 1/4 turn at a time.</div><div>3) needle-nose vice grips.</div><div><br></div><div>Two came out using #2. The rest were #1.There were four screws per window and...a lot of windows. The stupidest thing about this is that the latch locks closed over one of the screw heads--so you can't access that screw until it unlocks. You can, however, just break off the latch handle with a pair of pliers very easily. This also removes the latch tooth, allowing you to open the window. So as a security feature those latches are pretty useless. </div><div><br></div><div>FWIW, I remembered I had a security screw removal set of bits, including the "fork" bits that are supposed to work on those security screws. I couldn't get them to work--they just cammed out like a regular flat-blade.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Oct 22, 2020 at 2:52 PM John Innis <<a href="mailto:jdinnis@gmail.com">jdinnis@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Wow $40 for a pair of pliers.  Maybe worth it if they work, but pretty steep to take a chance on...<br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Oct 22, 2020 at 2:00 PM Jeff Scarbrough <<a href="mailto:fishplate@gmail.com" target="_blank">fishplate@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Oddly enough, I got a link to this today...One application is removing stubborn/anti-tamper screws<div><br></div><div><a href="https://www.amazon.com/dp/B00LMOAYR2/" target="_blank">https://www.amazon.com/dp/B00LMOAYR2/</a><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Oct 21, 2020 at 9:42 PM Scott Hall <<a href="mailto:scott.hall.personal@gmail.com" target="_blank">scott.hall.personal@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">New house was a foreclosure.  It was 'secured' at some point.  One of the security features was locking sash latches in all the windows.  They did not leave a key to those locks.  The sash latches are secured with security/one-way screws that cannot just be unscrewed.  <div dir="auto"><br></div><div dir="auto">They're also pretty hard and so close to the window pane itself that drilling them with a reverse drill bit isn't working.  And they're small enough that just grabbing them with a needle-nose vice grip isn't working either.  </div><div dir="auto"><br></div><div dir="auto">Any advice before I do something stupid and screw up what we're some nice windows before the idiots got involved?</div></div></blockquote></div></blockquote></div>
</blockquote></div></div>