<div style="color:black;font: 12pt Arial, Helvetica, sans-serif;">
<div> <font size="3">The real question is what are you powering?  A 175 watt inverter powering a 100W load will draw 100W/12V = 8.3A.  Just because the inverter has a 175 capacity it will draw only the power it needs to run the load.  So if you have a specific load in mind start there.  If this is for generic use then go with the capacity.<br>
</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">Then factor in efficiency which on any modern inverter is in the 85-95% range.  So your 14.5 amps could be 17 amps.  <br>
</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">Also consider that a 12 gauge wire has a resistance of 2.5 Ohms per 1000ft.  A 10 foot run there an back is a total of 20 ft.  So <br>
</font></div>

<div><font size="3">2.5*20/1000 = .05 Ohms.  At 17 amps you will get a voltage drop of .85 volts.  Not an issue since an automotive battery typically produces 13 to 13.5 and a functioning alternator runs at 14 volts or more.  But if you were making a longer run the voltage drop could be more of a wire size determinant than the wire's capacity.</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">Lastly, check the nameplate data.  Per UL, CSA, IEC, etc standard these devices will have a name plate indicating the power in (worst case) and the power out (max ratings).</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">Other than that it's pretty simple.</font><br>
</div>

<div> <br>
</div>

<div style="clear:both"><font size="4">Dave </font><br>
<br>
</div>

<div> <br>
</div>

<div> <br>
</div>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: john niolon <jniolon@att.net><br>
To: shop-talk <shop-talk@autox.team.net><br>
Sent: Sat, Sep 26, 2020 3:22 pm<br>
Subject: [Shop-talk] ohms law help<br>
<br>

<div id="yiv4470871034">
<style type="text/css">#yiv4470871034 body {margin:0.7em;}#yiv4470871034 body.yiv4470871034OECFntDef, #yiv4470871034 body.yiv4470871034OECFntDef div {font-family:"Segoe UI", Tahoma, Verdana, Arial, Helvetica, sans-serif;font-size:12pt;}</style>

 

<div>

<div>been a long time since I used this    </div>


<div> </div>


<div>175 watt ac/dc converter</div>


<div>12 volt dc</div>


<div> </div>


<div>looking for amp draw off battery</div>


<div> </div>


<div>power/voltage = amps</div>


<div> </div>


<div> </div>


<div>175/12 = 14.5 amps    right ??    and 10' of 12 gauge wire should do it  right ??</div>


<div> </div>


<div>thanks</div>


<div>john</div>


<div> </div>
</div>
</div>
_______________________________________________<br>
<br>
<a ymailto="mailto:Shop-talk@autox.team.net" href="mailto:Shop-talk@autox.team.net">Shop-talk@autox.team.net</a><br>
Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.96<br>
Archive: <a href="http://www.team.net/pipermail/shop-talk" target="_blank">http://www.team.net/pipermail/shop-talk </a><a href="http://autox.team.net/archive" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com" target="_blank">http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com</a><br>
<br>
</div>
</div>