<div dir="ltr">Hi Tom,<div><br></div><div>I tried most everything, and nothing really worked for oil that had penetrated the concrete. <div><br></div><div>Kitty litter ground into the stain with the end of a red brick worked the best, but I eventually just gave up trying and went to vinyl flooring:</div><div><br></div><div><a href="https://store.garageflooringllc.com/t95lv2410-std.html">https://store.garageflooringllc.com/t95lv2410-std.html</a></div><div><br></div><div>I used the diamond pattern gray for where the cars park and white elsewhere. I should have used gray also for where the motorcycles sit as they leave tire marks on the white when the tires are hot.</div><div><br></div><div>They are self-adhesive in 24" x 24" square tiles. They go down very quickly once you have cleaned and sealed the floor reasonably well (stains do not matter). I used this sealer/primer first:</div><div><br></div><div><a href="https://www.homedepot.com/p/BEHR-Premium-1-Gal-Concrete-and-Masonry-Bonding-Primer-88001/100129649">https://www.homedepot.com/p/BEHR-Premium-1-Gal-Concrete-and-Masonry-Bonding-Primer-88001/100129649</a><br></div><div><br></div><div>Even if you are not going to lay vinyl flooring down, I would use this sealer on the concrete as it prevents future oil stains, makes it much less dusty, easier to clean, etc.</div><div><br></div><div>Aside from looking terrific, vinyl is much easier on the knees than concrete, and it quiets down the noise as well. Things do not break as easily when dropped. I used a good deal of white, and it definitely brightened up the shop.</div><div><br></div><div>They will mark-up and can be gouged with sharp jack stands, etc, but a ruined tile is very easy to replace if you wanted to.<br><div><br></div><div>best,</div></div></div><div><br></div><div>doug</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Sep 13, 2020 at 1:38 PM Thomas Coradeschi <<a href="mailto:tjcora@icloud.com" target="_blank">tjcora@icloud.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">All: I’d like to seek some input from y’all on successes (or failures) in cleaning oil stains from a trowel finished concrete garage floor. <br>
<br>
I’ve been down the simple green & pressure washer route, don’t really see any positive results there. I’m not looking for a “like new” outcome; concrete is way too porous for that, but I would like to see better than I have right now. <br>
<br>
Any thoughts?<br>
<br>
Thanks. <br>
<br>
Tom Coradeschi<br>
<a href="mailto:tjcora@icloud.com" target="_blank">tjcora@icloud.com</a><br>
_______________________________________________<br>
<br>
<a href="mailto:Shop-talk@autox.team.net" target="_blank">Shop-talk@autox.team.net</a><br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.96<br>
Archive: <a href="http://www.team.net/pipermail/shop-talk" rel="noreferrer" target="_blank">http://www.team.net/pipermail/shop-talk</a> <a href="http://autox.team.net/archive" rel="noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/shop-talk/dirtbeard@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/shop-talk/dirtbeard@gmail.com</a><br>
<br>
</blockquote></div>