<div dir="ltr">I'm cleaning up and rebuilding a locally built, wood decked utility trailer. Typical angle iron/tube frame construction. The original paint is worn, a lot, and there's considerable surface rust. I took it to the quarter car wash and cleaned it up as best I could.<div><br></div><div>I'm not inclined to have the whole thing media blasted so the plan is, doing a section at a time, to use wire brushes and a detail sander to remove as much of the loose paint as I can, and then hit that area with rattle can primer/paint to "seal/convert" the rust I can't get off, then move to the next section.</div><div><br></div><div>Realizing there are products out there that supposedly work like magic, what actually does a decent job? I'm looking for durability and protection, not a car show finish.</div><div><br></div><div>RD</div></div>