<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>I’m trying to correctly describe a type of hinge, but </DIV>
<DIV>I’m not familiar with the nomenclature.</DIV>
<DIV>I’m wanting to place to thick door panels at 90 deg </DIV>
<DIV>to each other, but in the form of a “T”, not an “L”.</DIV>
<DIV>When assembled, one side can “fold” or “close” </DIV>
<DIV>down so that the two panels are parallel to each </DIV>
<DIV>other, but when open, they would be locked in </DIV>
<DIV>a “T” formation because the movable panel cannot </DIV>
<DIV>extend beyond 90 deg due to the interference of the </DIV>
<DIV>movable panel’s edge against non-moving panel.</DIV>
<DIV> </DIV>
<DIV>Hope this makes sense. The problems are:</DIV>
<DIV> </DIV>
<DIV>The fingers (that encircle the hinge pin) must be </DIV>
<DIV>flat against the panel on both sides</DIV>
<DIV> </DIV>
<DIV>The minge pin must be removable.</DIV>
<DIV> </DIV>
<DIV>In essence I’m using two hinges to connect to panels </DIV>
<DIV>then fold the panels together, move the panel assembly </DIV>
<DIV>into a small room, open and essentially make a 90 deg </DIV>
<DIV>screen within a small area. Possible disassembly may be </DIV>
<DIV>required in the future.</DIV>
<DIV> </DIV>
<DIV>How best to describe this type of box hinge?</DIV>
<DIV> </DIV>
<DIV>Super thanks, BTW this all applies to some improvements </DIV>
<DIV>I’m making in my shop.........!!</DIV>
<DIV> </DIV>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">Steve
Hammatt<BR>Mount Vernon WA USA<BR><A
href="http://www.leatherplates.com">www.leatherplates.com</A></DIV>
<DIV
style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000"><BR><BR><BR> </DIV></DIV></DIV></BODY></HTML>