<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body><div>I have used Amerlock paint on my floors. Not made for floors but rather for offshore oil rigs. Figure thats a pretty ruff environment so the floor should be easy. It has held up very well for many yesrs now. It will get dull in hi traffic areas but is just not affected by chemicals.</div><div>Only caveat is that it really is smelly while drying...as in you really dont want to be around for the next 24 hours after you paint. Wear a good respirator when paimting.</div><div><br></div><div>Bottom line...held up v well and i would use it again.</div><div><br></div><div>Painted into a corner again...</div><div>Nick in norcal</div><div><br></div><div><br></div><div><br></div><div id="composer_signature"><div style="font-size:85%;color:#575757" dir="auto">Sent via the Samsung Galaxy S7 active, an AT&T 4G LTE smartphone</div></div><div><br></div><div style="font-size:100%;color:#000000"><!-- originalMessage --><div>-------- Original message --------</div><div>From: john Mitchell <jmitch@snet.net> </div><div>Date: 4/30/17 9:57 AM (GMT-08:00) </div><div>To: Shop Talk <shop-talk@autox.team.net> </div><div>Subject: [Shop-talk] Epoxy garage floor coatings </div><div><br></div></div>I decided to do an epoxy floor in my garage and it's been a total <br>nightmare. The guy painting my house said he could do it and had done <br>others before. I prepared the floor by grinding down to bare concrete <br>with a diamond pad on a floor machine rented from Home Depot. I let the <br>painter choose the product. He bought Rustoleum Rock Solid which said <br>there would be enough for a 2.5 car garage. My garage is a basic 2 car <br>22' by 24' with a little cut off for a chimney. He used the kit and <br>there is no way it was going to be enough as it only coated 3/4s of the <br>garage and thinly at that. He went and bought another single kit to <br>finish and of course it didn't match the first color. He let it dry a <br>few day and sanded the floor to level the decorative chips in the paint <br>and used another 2.5 size kit to top coat it. the color is a tan and <br>gray area rose through the paint basically ruining the looks of the <br>paint. I can't really blame him as he followed all the directions <br>carefully. I think Rustoleum will reimburse him for all the paint I <br>hope. At this point, I want to grind it all back off and start with <br>another product. Anyone had any recent experience with garage floor <br>coatings? Thanks very much, John Mitchell Shelton, CT<br><br>_______________________________________________<br><br>Shop-talk@autox.team.net<br>Donate: http://www.team.net/donate.html<br>Suggested annual donation $12.96<br>Archive: http://www.team.net/archive<br>Forums: http://www.team.net/forums<br>Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/vintagenick42@yahoo.com<br><br></body></html>