[Shop-talk] Wheel balancing

[Robert Rochlin]

Last time I had wire wheels balanced the tech told me that stick on weights should only be used on alloy wheels.
Bob
‘72 TR6
Sent from my iPhone

> On Jun 12, 2024, at 9:11 AM, Jim Juhas <james.f.juhas at snet.net> wrote:
> 
> I exclusively use stick-on weights on the inside of the wheel, and use the racers’ trick of covering them with duct tape, the silver foil type with the peel off backing. My balancer gives me choices for static or dynamic balance locations but mostly use static around the inside center of the rim width. Not an original idea. SASCO Motorsports, from whom I purchase my race tires, does them this way. I do this on alloy, steel and wire wheels. I do first clean the surface where the weights will go.
> 
> Sent from my iPhone
> 
>>> On Jun 12, 2024, at 8:14 AM, eric at megageek.com wrote:
>>> 
>> Great hive mind...
>> 
>> I am having some issues with wheel weights staying on.  I'm using new weights meant for allow wheels, and I'm having a hard time getting the weight on the rim and staying there.
>> 
>> Is there a trick to this that I'm missing?  I never had problems with steel rims and weights.
>> 
>> Thanks.
>> 
>> Moose_______________________________________________
>> 
>> Shop-talk at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/james.f.juhas@snet.net
>> 
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/rrochlin@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20240612/fae30075/attachment.htm>