[Shop-talk] flood light extension (Steven Trovato)

[Mark Miller]

If the wires aren't long enough you can extend it with a piece of 
threaded conduit and pipe plus a type C conduit body you can make the 
connection in: 
https://www.lowes.com/pd/Sigma-Electric-ProConnex-1-2-in-Rigid-Conduit-Body/3389356


Regards,

Mark Miller   707-490-5834
markmiller at threeboysfarm.com

> Outside my shop I have a typical flood light with two of these:
>
> https://www.lowes.com/pd/Sigma-Electric-2-25-in-LED-Gray-Switch-Controlled-Floodlight/3136837
>
> Is there any way to extend the part with the threaded end?  Through
> some bad planning, one of the lights is blocked by the gutter
> downspout.  I would like to extend it out from there.  If the wires
> need to be longer I can figure out how to do that.  Whatever I do
> will have to be suitable for outdoor use.  Moving the downspout would
> be difficult.  I can also relocate the whole light, but some sort of
> extension arm would be the quickest and easiest solution of it is
> possible.  Thanks.
>
> -Steve T.
>
>    
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20240605/4abaa1b6/attachment.htm>