[Shop-talk] flood light extension

[Pat Horne]

Steve, you should be able to make an extension from a piece of rigid metal conduit. It will be threaded on both ends & will need a coupling to connect to the fixture. EMT conduit would probably be too light unless you only need an inch or two extension. 

Peace, Pat

Pat Horne 
We support Habitat for Humanity


On Jun 4, 2024, at 11:39 AM, Steven Trovato <strovato at optonline.net> wrote:

Outside my shop I have a typical flood light with two of these:

https://www.lowes.com/pd/Sigma-Electric-2-25-in-LED-Gray-Switch-Controlled-Floodlight/3136837

Is there any way to extend the part with the threaded end?  Through some bad planning, one of the lights is blocked by the gutter downspout.  I would like to extend it out from there.  If the wires need to be longer I can figure out how to do that.  Whatever I do will have to be suitable for outdoor use.  Moving the downspout would be difficult.  I can also relocate the whole light, but some sort of extension arm would be the quickest and easiest solution of it is possible.  Thanks.

-Steve T.



--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com