[Shop-talk] concrete fasteners

[Tom Coradeschi]

That would be my solution. I have a set in my garage floor (1/2-13, I think) to tie down my tire changer when it’s in use. I put some flathead screws in them when not in use - keeps the crud out. 

Tom Coradeschi
tjcora at icloud.com

> On Jun 10, 2023, at 12:26 PM, John P. New <jnew at hazelden.ca> wrote:
> 
> How about "Female-Threaded Anchors for Concrete"
> https://www.mcmaster.com/products/anchors/anchor-type~female-threaded/
> 
> John P. New
> London, Ontario, Canada
> 
> 
>> On Saturday, June 10, 2023 10:29:57 A.M. EDT Tim . wrote:
>> I did some digging online and also looked at the local menards. I cannot find what I have pictured in my mind.....
>> 
>> I am putting up a Vevor Carport right in front of my garage door in an effort to create more Shop space (see how I tied this into the shoptalk theme !) by adding a covered parking spot for my wife's DD. I am setting it up to be driven through into the garage so my old Jeep can be driven out through it and thus stored at home in winter.
>> 
>> What I want to do it secure the carport to the slab but be able to remove it easily and not have the concrete anchor stick up from the ground. I have pictured putting a anchor in slab and then screwing down into the anchor through the drilled feet of the carport's framing.
>> 
>> Can someone point me to what I am looking for please?
>> 
>> Thanks
>> tim
>> 
>> 
>> 
> 
> 
> 
> 
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/tjcora@icloud.com
>