[Shop-talk] retapping a hole

[Pat Horne]

I agree w/using a Helicoil. Also, hit the threads with a bit of blue locktite. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jan 15, 2023, at 10:00 AM, john <jniolon at att.net> wrote:


I have a mirror mount on my truck door that held a rear view mirror.  Unfortunately the mirror decided it didn't want to stay with my truck.
So, I'm looking for a replacement. The mount is drilled and tapped for 1/4"-28 threads and most of what I find is 1/4-20.  I'm wondering if I can
re-tap the metal over existing threads with a 1/4-20 thread and it will hold...or will I just make a mess of it and make it broke. The drill side for the
two thread sizes are within a 64th or so of being the same and the mount is 7/16" or so wide so I have some meat to play with...
 
suggestions?
 
john
 
<555-90336.jpg>
 
 
another option... drill completely thru mount and find a mirror with a stud long enough to pass thru completely
and secure with an acorn nut (or something)  at the back side of the mount
 
<drillthru.jpg>
 
another caveat... I don't want to remove the mounts from the door... involves removing windows and regulators
to get to the internal nuts.
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20230115/4b5a888b/attachment.htm>