[Shop-talk] Plugging holes in refrigerators

DAVID MASSEY dave1massey at cs.com
Thu Jul 21 06:16:59 MDT 2022


 

(This has impacted my efficiency in the shop.)
 I hear you.  My beer fridge is in my garage next to my TR8 (obligatory car content).  My only saving grace is I don't keep glasses out there so tapping the keg involves the inconvenience of going back into the kitchen to fetch one.
I've found that those step drills do a very good job of rounding out odd shaped holes and leave a pretty clean edge.  I'd consider drilling out to fit a common snap-in plug.
Brewery stickers are obligatory on a kegerator.  The more, and the more obscure, the better.
 
Dave 


 
 
-----Original Message-----
From: Scott Hall <scott.hall.personal at gmail.com>
To: shop-talk at autox.team.net <Shop-talk at autox.team.net>
Sent: Wed, Jul 20, 2022 7:38 pm
Subject: [Shop-talk] Plugging holes in refrigerators

I have acquired a kegerator. It lives in the garage. 
(This has impacted my efficiency in the shop.)
The previous owner drilled two holes in side of the unit for drain and gas lines. I don't have a floor drain, so my drain line is going to a bucket in the unit, and my gas tank lives in there, too.
I finally got around to cleaning up those lines and now I have two irregular holes in the side of my kegerator, leaking out 34° air.
Whomever did these was not interested in his workmanship. They're .5 inch by .75 inch, more or less, so round plugs really don't work. The sheet metal is also pretty jagged. I thought about drilling then out to a uniform shape, but I really don't want to make them bigger.
I could masking tape one side and spray foam them, but I'm hoping the outside could be a little more permanent.
Anybody have thoughts? All opinions welcome._______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20220721/30e3794d/attachment-0001.htm>


More information about the Shop-talk mailing list