[Shop-talk] Jet Table Saw

Tom Coradeschi tjcora at icloud.com
Mon Aug 15 17:18:31 MDT 2022


Jet makes nice stuff, but support is a bit of a crapshoot. I have a JWTS-10, which is probably the same basic saw, just 10 years or so newer. I grab the part numbers for the few I have needed, and let google do the searching. 

Tom Coradeschi
Tjcora at icloud.com

> On Aug 14, 2022, at 12:30 PM, Jeff Scarbrough <fishplate at gmail.com> wrote:
> 
> Got a Jet table saw from a friend yesterday.  It needs a good bit of
> cleaning up, and a few parts (fence rails, etc.)  Before I get too
> deep into it, I wanted to see what parts are available.
> 
> It's a Jet JPS-10 from 1989.  Apparently Jet still make a JPS-10, but
> it looks much different.  Trying to find parts on their site or
> ereplacementparts.com is proving frustrating.
> 
> There is a stock number on the saw (706429) but that doesn't seem to
> mnarrow down the field much.
> 
> Anyone know of a source for Jet parts that can be navigated by
> multiple models with the same number?
> 
> Thanks!
> 
> P.S. This would be a replacement for a Craftsman saw from 1955 which
> works great but uses 8" blades which are rare and expensive.  Been
> using circular saw blades with a bushing for 30 years, but that's
> getting old, as am I.
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/tjcora@icloud.com
> 


More information about the Shop-talk mailing list