[Shop-talk] Fw: shop internet update
john niolon
jniolon at att.net
Wed Apr 20 12:37:58 MDT 2022
went with some power line units from d-link ( DHP-309AV ) and they worked
great
much better than my looooong Ethernet cable. cat-5 specs were 10mbps up and
7.6 mbps down
that's on a 50 down and 5 up U-verse network
the d-link gave me 10mbps up and 20 mbps down...… with a red (good) data rate blinking... don't
know how to get it to yellow or green... power line links thru a 75 ft of #14
wire to a 15amp breaker in a 200 amp service
thru a 100 amp circuit breaker thru 100 ft of cable to a 100 amp sub panel and
15 amp breaker and 25 feet of #12.
I'm satisfied with that for intermittent use in shop...
john
----- Original Message -----
From: john niolon <jniolon at att.net>
To: shop-talk <shop-talk at autox.team.net>
Sent: 4/11/2022 5:01:45 PM
Subject: shop internet
I'm
trying to get some 'reliable' internet service to my unattached shop
building... just a shade too far for cable access (just under 300 feet of
cable) and too many obstacles for wireless
\even with an extender... looking at powerline units... two boxes...modem
plugs into one and it plugs into 120 v plug...other box plugs into any other
plug on same
breaker box and the laptop plugs into it with cat-5-cable..
anyone have any experienced with this type service ??
example:
thanks
john
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20220420/9c92e7af/attachment.htm>
More information about the Shop-talk
mailing list