[Shop-talk] Square D QO breaker Box

[Jack Brooks]

David,

A picture is attached.

I think the list will strip it out for everyone else.  The insert is removable.

Thanks,

Jack

-----Original Message-----
From: David Scheidt <dmscheidt at gmail.com> 
Sent: Tuesday, April 13, 2021 7:58 PM
To: Jack Brooks <JIBrooks at live.com>
Cc: Shop Talk <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] Square D QO breaker Box

On Tue, Apr 13, 2021 at 6:39 PM Jack Brooks <JIBrooks at live.com> wrote:
>
> I am building a Sprinter van into an RV and have a question about the 120v breaker box (SquareD QO24L70RBCP).  It is a 2-Space, 4-Circuit load center.  My concern is that while the Neutral bar has four positions on a common bar, the two breaker connections are independent, without a common bar between the two.  This surprised the heck out of me. My inverter (Victron 24/70/3000)  has a single AC output with a “cage clamp” terminal, not a screw down or stud terminal which would be easy. I can run a 6 or 8 AWG from the inverter to the Breaker box, but it needs to go to the two separate screw down terminals.  Physically, I believe I can run an 8 AWG wire into one breaker, and then back out to the other breaker, but I’m concerned about whether this is a code violation.
>

Ccan you post a picture of the inside of the box? I'd like to see the bus baring.


--
David Scheidt
dmscheidt at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PXL_20210414_045616115.jpg
Type: image/jpeg
Size: 2680053 bytes
Desc: PXL_20210414_045616115.jpg
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20210414/57936413/attachment-0001.jpg>