[Shop-talk] stud removal

[Tim .]

Two nuts (obviously locked together), your favorite penetrant and heat if possible without doing damage.

My less than .02


________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of Steven Trovato <strovato at optonline.net>
Sent: Wednesday, April 7, 2021 7:31 PM
To: shop-talk at autox.team.net <shop-talk at autox.team.net>
Subject: [Shop-talk] stud removal

What are you guys using to remove studs?  I see various tools that
have teeth that dig into the stud.  That is OK when you are replacing
them, but sometimes you don't want them damaged.  I usually just lock
two nuts together and remove that way.  I see some stud removal sets
that essentially do the same thing.  Two parts lock together.  I'm
not seeing the advantage to this.  Nuts are a lot cheaper.  Am I
missing something?

-Steve T.


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/tims_datsun_stuff@outlook.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20210408/d76f26d0/attachment.htm>