[Shop-talk] Shop Vac

[Mark Andy]

Howdy,

I have the Milwaukee M18 shop vac.  I use it ALL the time.  So much handier
to not have to deal with a cord and small enough that you can carry it to
where you're working easily.

Not sure what other options there are for good battery shop vacs if you're
not in the Milwaukee universe, but I'd certainly recommend that type of
shop vac.  Probably not quite the same power as a big corded setup, but I
find it much nicer to use than my old school one.

Mark

On Sat, Sep 12, 2020 at 3:43 PM Jeff Scarbrough <fishplate at gmail.com> wrote:

> So, my old Shop Vac brand shop vac bit the dust.  Motor brushes fried
> themselves.   I got some replacement brushes, but they were too big so I
> ground them down to the right size.   Didn't help a whole lot.  Runs slow,
> makes smoke - not terribly useful.
>
> So, looking at new wet/dry vacs...I'd prefer a 2 inch hose, but could work
> with a smaller hose.  Any recommendations?
>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/marka@maracing.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200912/9d055a51/attachment.htm>