[Shop-talk] Question about 1/2" belt sander belts

[Jack Brooks]

Flapper disk?  They work great on aluminum.

Jack
________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of Bob Spidell <bspidell at comcast.net>
Sent: Monday, October 12, 2020 2:03:13 PM
To: shop-talk at autox.team.net <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] Question about 1/2" belt sander belts

re: "3-Is there another way to sand an edge of a AL SCUBA tank I should
try?"

Flap disk on 4.5" angle grinder? I have an old CP grinder that I've used
for hours on end and it's still chuggin'

re: "Anyone have any clever names for such a line of tanks? "

'Scuba Doo?' (didn't put a whole lot of thought into this, obviously)



On 10/12/2020 1:30 PM, eric at megageek.com wrote:
> It's rare that a HF tool gets a second chance to impress me. But I have to say, the CHICAGO ELECTRIC 1/2" Belt Sander did just that, but left me with a new problem.
> https://www.harborfreight.com/53-amp-12-in-heavy-duty-bandfile-belt-sander-62863.html
>
> I started a new 'sideline' of products to sell. They are customize products made with old scuba tanks.
>
> So I needed a way to dress up the 1/2" thick edges of the cut tanks. Some die grinding discs made for AL do the trick, but it still needs a sanding.
>
> I tried paper, sponges, and other methods. The AL grabs an rips most of these. For grins, I tried the 1/2" belt sander I got a while ago but never used it because it was a bit of a disappointment.
>
> Well, it works AWESOME for doing this. It's quick and easy. HOWEVER, the issue is that the tape on the belts quickly fails long before the belt's sanding ability is worn.
>
> I tried every tape here I can find to repair the belts with no luck. The tape needs to be ultra tacky and strong, while not stretchable and the glue has to hold when it gets warm.
> So my question is three fold.
>
> 1-Does anyone know of a source of really good belts for this sander other than the HF ones? HF no longer has a store brand and just have the 'Baxter' and 'Warrior' brands which I think might just be the same quality.
>
> 2-Is there a tape I can use to fix these belts that will last longer?
>
> 3-Is there another way to sand an edge of a AL SCUBA tank I should try?
>
> Bonus question-
> Anyone have any clever names for such a line of tanks? I was thinking of "Tanks for the Memories" but I was wondering if anyone else had any better ideas.
>
> Note, I am making bells, mailboxes, TP holders, lamps, and a bunch of other items out of the tanks.
>
> "Tanks" in advance
>
>
>
>
> "Be as beneficent as the sun or the sea, but if your rights as a rational being are trenched on, die on the first inch of your territory." Ralph Waldo Emerson -Who is John Galt?
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/bspidell@comcast.net
>

_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20201012/0524dc5f/attachment.htm>