[Shop-talk] Shop air line pressure

[RONALD GRIFFING]

As I recall, most HF tools are rated at 90 psi. That is what I run mine at with an oil fogger at the wall drop.

> On May 31, 2020 at 12:07 PM eric at megageek.com wrote:
> 
>     Quick question,
> 
>     I think that my cheapie HF tools are failing because my air lne presure is too high (about 135 psi for the whole shop.)
> 
>     Do you guys keep all the lines at 90 psi, or something else?  I have a monster compressor and I keep one line at 90spi (when I use my nailers) but I never had a problem before with the other tools failing.
> 
>     What do you guys run your air hammers/die grinders/impact guns/etc at?
> 
>     Thanks.
> 
> 
>     "Be as beneficent as the sun or the sea, but if your rights as a rational being are trenched on, die on the first inch of your territory." Ralph Waldo Emerson
>     -Who is John Galt? _______________________________________________
> 
>     Shop-talk at autox.team.net
>     Donate: http://www.team.net/donate.html
>     Suggested annual donation $12.96
>     Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/ronald.griffing@comcast.net
> 
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200531/1e872191/attachment.htm>